Pass Guaranteed Quiz Unparalleled NSE7_EFW-7.2 - Fortinet NSE 7 - Enterprise Firewall 7.2 Updated Dumps

Blog Article

Tags: NSE7_EFW-7.2 Updated Dumps, Study NSE7_EFW-7.2 Reference, NSE7_EFW-7.2 Pass Test Guide, Real NSE7_EFW-7.2 Questions, NSE7_EFW-7.2 Test Engine

P.S. Free 2025 Fortinet NSE7_EFW-7.2 dumps are available on Google Drive shared by VerifiedDumps: https://drive.google.com/open?id=1_A1Sc-VwKRFaTqSGPvYHnl_sbzR5aZ_W

In order to save you a lot of installation troubles, we have carried out the online engine of the NSE7_EFW-7.2 latest exam guide which does not need to download and install. This kind of learning method is convenient and suitable for quick pace of life. But you must have a browser on your device. Our online workers are going through professional training. Your demands and thought can be clearly understood by them. Even if you have bought our high-pass-rate NSE7_EFW-7.2 training practice but you do not know how to install it, we can offer remote guidance to assist you finish installation. In the process of using, you still have access to our after sales service. All in all, we will keep helping you until you have passed the NSE7_EFW-7.2 exam and got the certificate.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

Topic	Details
Topic 1	Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 2	VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
Topic 3	System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.
Topic 4	Central management: The topic of Central management covers implementing central management.
Topic 5	Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.

>> NSE7_EFW-7.2 Updated Dumps <<

2025 NSE7_EFW-7.2 Updated Dumps | Latest Fortinet NSE7_EFW-7.2: Fortinet NSE 7 - Enterprise Firewall 7.2 100% Pass

Using a smartphone, you may go through the Fortinet NSE7_EFW-7.2 dumps questions whenever and wherever you desire. The NSE7_EFW-7.2 PDF dumps file is also printable for making handy notes. VerifiedDumps has developed the online Fortinet NSE7_EFW-7.2 practice test to help the candidates get exposure to the actual exam environment. By practicing with web-based Fortinet NSE7_EFW-7.2 Practice Test questions you can get rid of exam nervousness. You can easily track your performance while preparing for the Fortinet NSE 7 - Enterprise Firewall 7.2 exam with the help of a self-assessment report shown at the end of Fortinet NSE7_EFW-7.2 practice test.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q53-Q58):

NEW QUESTION # 53
Exhibit.

Refer to the exhibit, which shows a partial touting table
What two concisions can you draw from the corresponding FortiGate configuration? (Choose two.)

A. net-device is enabled in the tunnel IPSec phase 1 configuration
B. IPSec Tunnel aggregation is configured
C. OSPI is configured to run over IPSec.
D. add-route is disabled in the tunnel IPSec phase 1 configuration.

Answer: A,D

Explanation:
* Option B is correct because the routing table shows that the tunnel interfaces have a netmask of
255.255.255.255, which indicates that net-device is enabled in the phase 1 configuration. This option allows the FortiGate to use the tunnel interface as a next-hop for routing, without adding a route to the phase 2 destination1.
* Option D is correct because the routing table does not show any routes to the phase 2 destination networks, which indicates that add-route is disabled in the phase 1 configuration. This option controls whether the FortiGate adds a static route to the phase 2 destination network using the tunnel interface as the gateway2.
* Option A is incorrect because IPSec tunnel aggregation is a feature that allows multiple phase 2 selectors to share a single phase 1 tunnel, reducing the number of tunnels and improving performance3.
This feature is not related to the routing table or the phase 1 configuration.
* Option C is incorrect because OSPF is a dynamic routing protocol that can run over IPSec tunnels, but it requires additional configuration on the FortiGate and the peer device4. This option is not related to the routing table or the phase 1 configuration. References: =
* 1: Technical Tip: 'set net-device' new route-based IPsec logic2
* 2: Adding a static route5
* 3: IPSec VPN concepts6
* 4: Dynamic routing over IPsec VPN7

NEW QUESTION # 54
Refer to the exhibit, which contains a partial BGP combination.

You want to configure a loopback as the OGP source.
Which two parameters must you set in the BGP configuration? (Choose two)

A. recursive-next-hop
B. ebgp-enforce-multihop
C. update-source
D. ibgp-enfoce-multihop

Answer: B,C

Explanation:
To configure a loopback as the BGP source, you need to set the "ebgp-enforce-multihop" and "update-source" parameters in the BGP configuration. The "ebgp-enforce-multihop" allows EBGP connections to neighbor routers that are not directly connected, while "update-source" specifies the IP address that should be used for the BGP session1. Reference := BGP on loopback, Loopback interface, Technical Tip: Configuring EBGP Multihop Load-Balancing, Technical Tip: BGP routes are not installed in routing table with loopback as update source

NEW QUESTION # 55
Refer to the exhibit.

which contains a partial configuration of the global system. What can you conclude from this output?

A. NPs and CPs arc disabled
B. Only CPs arc disabled
C. Only NPs are disabled
D. NPs and CPs are enabled

Answer: D

Explanation:
The configuration output shows various global settings for a FortiGate device. The terms NP (Network Processor) and CP (Content Processor) relate to FortiGate's hardware acceleration features. However, the provided configuration output does not directly mention the status (enabled or disabled) of NPs and CPs.
Typically, the command to disable or enable hardware acceleration features would specifically mention NP or CP in the command syntax. Therefore, based on the output provided, we cannot conclusively determine the status of NPs and CPs, hence option D is the closest answer since the output does not confirm that they are enabled.
References:
* FortiOS Handbook - CLI Reference for FortiOS 5.2

NEW QUESTION # 56
Exhibit.

Refer to the exhibit, which contains a partial VPN configuration.
What can you conclude from this configuration1?

A. FortiGate creates separate virtual interfaces for each dial up client.
B. Dead peer detection s disabled.
C. The VPN should use the dynamic routing protocol to exchange routing information Through the tunnels.
D. The routing table shows a single IPSec virtual interface.

Answer: B

Explanation:
The configuration line "set dpd on-idle" indicates that dead peer detection (DPD) is set to trigger only when the tunnel is idle, not actively disabled1. References: FortiGate IPSec VPN User Guide - Fortinet Document Library From the given VPN configuration, dead peer detection (DPD) is set to 'on-idle', indicating that DPD is enabled and will be used to detect if the other end of the VPN tunnel is still alive when no traffic is detected.
Hence, option C is incorrect. The configuration shows the tunnel set to type 'dynamic', which does not create separate virtual interfaces for each dial-up client (A), and it is not specified that dynamic routing will be used (B). Since this is a phase 1 configuration snippet, the routing table aspect (D) cannot be concluded from this alone.

NEW QUESTION # 57
Which configuration can be used to reduce the number of BGP sessions in on IBGP network?

A. Route-reflector-client enable
B. Route-reflector-peer enable
C. Route-reflector-server enable
D. Route-reflector enable

Answer: A

Explanation:
To reduce the number of BGP sessions in an IBGP network, you can use a route reflector, which acts as a focal point for IBGP sessions and readvertises the prefixes to all other peers. To configure a route reflector, you need to enable the route-reflector-client option on the neighbor-group settings of the hub device. This will make the hub device act as a route reflector server and the other devices as route reflector clients. References :
= Route exchange | FortiGate / FortiOS 7.2.0 - Fortinet Documentation

NEW QUESTION # 58
......

Some people worry that our aim is not to Fortinet NSE 7 - Enterprise Firewall 7.2 guide torrent but to sell their privacy information to the third part to cause serious consequences. But we promise to you our privacy protection is very strict and we won’t sell the client’s privacy to others for our own benefits. Our aim to sell the NSE7_EFW-7.2 test torrent to the client is to help them pass the exam and not to seek illegal benefits. For that time is extremely important for the learners, everybody hope that they can get the efficient learning. So clients can use our NSE7_EFW-7.2 Test Torrent immediately is the great merit of our product. When you begin to use, you can enjoy the various functions and benefits of our product such as it can simulate the exam and boosts the timing function.

Study NSE7_EFW-7.2 Reference: https://www.verifieddumps.com/NSE7_EFW-7.2-valid-exam-braindumps.html

P.S. Free & New NSE7_EFW-7.2 dumps are available on Google Drive shared by VerifiedDumps: https://drive.google.com/open?id=1_A1Sc-VwKRFaTqSGPvYHnl_sbzR5aZ_W

Report this page

PASS GUARANTEED QUIZ UNPARALLELED NSE7_EFW-7.2 - FORTINET NSE 7 - ENTERPRISE FIREWALL 7.2 UPDATED DUMPS

Pass Guaranteed Quiz Unparalleled NSE7_EFW-7.2 - Fortinet NSE 7 - Enterprise Firewall 7.2 Updated Dumps